87 ADAM-6200 User Manual
Chapter 4 System Configuration
4.3.5.2 Configuration Environment
As previously mentioned, when you try to spread one of ADAM-6200 module, you will
be allowed to check the channel setting and GCL function by entering correct pass-
word in the Module Tree screen.
Note! You can configure all GCL related setting by clicking the GCL Configura-
tion item list. For the two features Peer-to-Peer and GCL, only one of
them can be enable at one time. If you enable Peer-to-Peer function
before, when you click the GCL Configuration and launch the GCL con-
figuration environment, you will find that it is disabled by default. Once
you click the Program GCL button (refer to table below) to enable the
GCL feature, the Peer-to-Peer function will be disabled.
To Next Page
Loading...
