119 ADAM-6200 User Manual
Chapter 4 System Configuration
4.3.6 Remotely Monitoring and Control via Web Server
As mentioned in feature highlight section, this new feature will bring obvious benefit
to user in maintenance anywhere over the Ethernet in the local field. Now the follow-
ing paragraph will show how to build up this circumstance and use it. This feature not
only works on PC or laptop, it can also work on portable devices, like smart phone or
pad.
Preset conditions:
1. Finish the installation and network setting of ADAM-6200 module
2. ADAM-6200 is connected to your local Ethernet network
Operating steps: (Take smart phone as example)
1. Make you smart phone connect to your local Ethernet network via wireless and
then open the browser of your smart phone.
2. Enter IP address of ADAM-6200 module
Please enter the IP address in URL field of the browser, for example:
172.18.3.163.
You will see the login page (shown as below) on the screen.
Note! ADAM-6200 module is developed by public HTML 5 base, but for
detailed indication and data transmission mode may be different on Web
page of the operating system.
For smart phone system, the minimum requirement of Web browsers as
below:
Safari 5 in Apple iOS
Web Browser in Google Android 4.0 (Ice Cream Sandwich)
Chrome in Google Android 4.0 (Ice Cream Sandwich)
Otherwise, if where you operate is PC platform, you can refer to the min-
imum requirement of Web browsers as below:
Internet Explorer (version 9)
Google Chrome (version 8)
Mozilla Firefox (version 10)
To Next Page
Loading...
Need help?
General
