Product Overview 1–17
Sound Level
The sound level at the operator’s position does not exceed 66 dB(A).
Safety and Compliance Labeling
The following warning and compliance labels are attached to the
SelectSet Avantra imagesetters:
Figure 1.2 Manufacturer’s identification label, located on the rear panel.
Figure 1.3 CDRH compliance label, located on the rear panel. It reads:
Agfa Division certifies that this product conforms to all
applicable provisions of 21 CFR Subchapter J
in effect as of the date of manufacture.
Agfa Division certifies that this product
conforms to all applicable provisions of 21
CFR Subchapter J in effect as of the date of
manufacture.
Wilmington, MA 01887
abc Division
WILMINGTON, MA 01887
U.S.A.
MODEL
PART NO.
SERIAL
VOLTS
AMPERES
WATTS
Hz
MFG.DATE
MADE IN U.S.A.
Location
To Next Page
Loading...
