Using the Imagesetter Control Panel 2–25
Unloading Media
When you press Unload, the imagesetter:
1. Checks for media in the take-up cassette or imaged media in the
drum.
2. Executes a feed and cut if media is detected in either place.
3. Rewinds the media in the drum back into the supply cassette.
Displaying Job History
When you press Display Job History in the Pause screen, the control
panel shows a list of completed jobs.
5
Job Number Five
5, 1, 1
Job Number Four
4, 1, 1
Job Number Three
3, 1, 1
Job Number Two
2, 1, 1
Job Number One
1, 1, 1
1. Press Pause, then Display Job History.
2. Press Pause to return to the Pause Screen.
2,343.2 ft.
To Unload:
Press once and the icon
flashes.
Press again to complete
unloading or...
...press Abort to cancel.