AGFA SelectSet Avantra Series - Displaying and Setting Parameters; Selecting a Screen

2–10 SelectSet Avantra Series Control Panel and Operating Guide
Displaying and Setting Parameters
❖ Note: This section describes all SelectSet Avantra screen functions.
However, not all functions apply to all models of SelectSet
Avantra imagesetters. For example, only the large format Avantra
36 and 44 imagesetters have the Bridge Shuttle/Weight function
due to the increased weight of their bridges.
To use a function, first go to the control panel screen for that function.
Selecting a Screen
1. Press Pause to go to the Pause screen.
2. Press the button for the screen you need. The following diagram
lists the functions on each of the four function screens.