AGFA SelectSet Avantra Series - Using Cassette Setup Functions

Using the Imagesetter Control Panel 2–39
Using Cassette Setup Functions
The steps for using the Select Supply and Exposure functions differ
slightly from those of the other Cassette Setup functions. Instructions
for using Select Supply and Exposure appear later in this section.
The steps for using the other Cassette Setup functions are:
Press to display the
value you want.
2. Use the Plus, Plus Plus, Minus, and Minus Minus
Press Abort to cancel and
return to the Pause screen.
3. Press Accept.
Press Accept to confirm
your settings.
1. Select a function.
For example, press
Media Width.
?
Press Cancel to reject
your new settings.