Agilent Technologies 1100 Series User Manual

1100 Series DAD and MWD User Manual 209
Index
A
accessory kit, 21
accessory kit parts, 166
Agilent
ChemStation Setup, 54
on internet, 208
algae information, 205
analog signal output, 17
ASTM
environmental conditions, 13
reference, 17
automatic configuration with Bootp, 40
B
Beer-Lambert (law), 91
bench space, 13
Bootp, 35
& Store, 35
automatic configuration, 40
initialization modes, 35
service, 40
storing the settings permanently, 45
using default, 37
using default parameters, 37
using stored, 36
C
cable
connecting APG remote, 23
connecting CAN, 23
connecting the ChemStation, 23
connecting the power, 23
choosing a flow cell, 90
configuration switches, 34
control and data evaluation, 16
control module
diagnostics and tests, 192
EMF, 187
firmware update, 188
serial number change, 190
test chromatogram, 194
tests, 192
correction factors for flow cells, 92
D
dark current
spectrum, 193
data evaluation and control, 16
delivery checklist, 20
diagnostics and tests
with control module, 192
dimensions and weight, 15
diode
width, 16
drift (ASTM) and noise, 16
E
EMF
on control module, 187
environment, 13
error messages
unsupported module, 171
ESD (electrostatic discharge) strap, 115
exchanging. see repairs
F
factory default settings, 34
features
safety and maintenance, 17
firmware
from internet, 208
update with control module, 188
updates, 150
flow cell
choosing one, 90
correction factors, 92
installation, 27
path length, 92
specifications, 16
G
GLP features, 17
H
high pressure flow cell
dimensions, 92
parts, 160
holmium oxide
declaration of conformity, 207
spectrum, 193
humidity, 15
I
information
on uv-radiation, 204
initialization mode selection, 35
installation
accessory kit, 21
bench space, 13
delivery checklist, 20
environment, 13
flow connections, 27
of flow cell and capillaries, 27
of the detector, 24
physical specifications, 15
power considerations, 12
power cords, 12
site requirements, 12
unpacking, 20
internet, 208
L
LAN
automatic configuration with Bootp, 40
Bootp, 35
Bootp & Store, 35
Bootp service, 40
configuration, 31
configuration switches, 34
factory default settings, 34
initialization mode selection, 35
link configuration selection, 39
manual configuration, 46
manual configuration with handheld
controller, 51
manual configuration with telnet, 47
PC and Agilent ChemStation Setup, 54
storing the settings permanently, 45
TCP/IP parameter configuration, 33
using default, 37
using default parameters, 37
using stored, 36
what you have to do first, 32
leak
correcting, 147

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English