Agilent 1200 Series Autosampler Reference Manual 265
Safety Information A
Some adjustments described in the manual, are made with power supplied to
the instrument, and protective covers removed. Energy available at many
points may, if contacted, result in personal injury.
Do not operate the instrument in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes a
definite safety hazard.
Use the instrument only with Agilent CAN connected instrument or with
remote controlled instrument.
Do not install substitute parts or make any unauthorized modification to the
instrument.
Capacitors inside the instrument may still be charged, even though the
instrument has been disconnected from its source of supply. Dangerous
voltages, capable of causing serious personal injury, are present in this
instrument. Use extreme caution when handling, testing and adjusting.
Safety Symbols
Table 62 shows safety symbols used on the instrument and in the manuals.
CAUTION
The operator of this instrument is advised that if the equipment is used in a manner not
specified in this manual, the protection provided by the equipment may be impaired.
WARNING
Any adjustment, maintenance, and repair of the opened instrument under voltage is
forbidden.
WARNING
Disconnect the instrument from the line and unplug the power cord before
maintenance.
To Next Page
General
