Agilent 1200 Series Autosampler Reference Manual 17
Installing the Autosampler 1
Unpacking the Autosampler
Damaged Packaging
Upon receipt of your autosampler, inspect the shipping containers for any
signs of damage. If the containers or cushioning material are damaged, save
them until the contents have been checked for completeness and the
autosampler has been mechanically and electrically checked. If the shipping
container or cushioning material is damaged, notify the carrier and save the
shipping material for the carriers inspection.
Delivery Checklist
Ensure all parts and materials have been delivered with the autosampler. The
instrument box contains the instrument and an Accessory kit. A separate box
contains the reference manual and the power cable.
In Table 2 on page 19 and Table 3 on page 20 are listed the content of each
accessory kit.
Please report missing or damaged parts to your local Agilent Technologies
sales and service office.
CAUTION
If you need to ship the autosampler at a later date, always park the transport assembly
before shipment (see “Transporting the Autosampler” on page 42).
CAUTION
If there are signs of damage to the autosampler, please do not attempt to install the
autosampler.
To Next Page
Loading...
Need help?
General
