Agilent Technologies 1200 series - Analog Cables

202 Agilent 1200 Series Autosampler Reference Manual
6Identifying Cables
Analog Cables
One end of these cables provides a BNC connector to be connected to
Agilent 1200 Series modules. The other end depends on the instrument to
which connection is being made.
Agilent 1200 to 3390/2/3 Integrators
Connector
01040-60101
Pin
3390/2/3
Pin
Agilent 1200
Signal Name
1ShieldGround
2Not connected
3CenterSignal +
4 Connected to pin 6
5 Shield Analog -
6 Connected to pin 4
7Key
8Not connected