Agilent Technologies 1200 series Reference Manual

242 Agilent 1200 Series Autosampler Reference Manual
8 Theory of Operation
Firmware Updates
Firmware updates can be done using your user interface:
• handheld control module with files from a PC-card or
• Agilent ChemStation with files from floppy disk
The file naming conventions are:
xxxx-vvv.DLB, where
xxxx is the product number, e.g. 1329 for the G1329A Autosampler), and
vvv is the revision number, for example 380 is revision 3.80
For instructions refer to your user interface.
NOTE
Update of main system can be done in the resident system only.
Update of the resident system can be done in the main system only.
Figure 40 Firmware Update Mechanism
Resident System Main System
Resident FW update
Main FW update

Agilent Technologies 1200 series Specifications

General

Brand	Agilent Technologies
Model	1200 series
Category	Laboratory Equipment
Language	English