Agilent Technologies 1290 infinity User Manual

138 1290 Infinity Quaternary Pump User Manual
8 Test Functions and Calibrations
Pump Leak Rate Test
• Outlet valve not properly assembled
• Re-tighten the outlet valve
• Check the position of the gold seal
• Leaky piston seals and/or position dependent leaks on the piston
• Remove the SW tubes from the support ring and check for leaks
• Replace the piston seals and clean the pistons
• Ensure that seals are lubricated when pushed in
• Use abrasive mesh >5000 grit

Agilent Technologies 1290 infinity Specifications

General

Brand	Agilent Technologies
Model	1290 infinity
Category	Laboratory Equipment
Language	English