© Agilent Technologies 2001–2003 Agilent 3070 System Installation Manual (MS Windows Version) 2-9
Chapter 2: MS Windows System Installation Reference: Editing Files
Open a File in BT-BASIC
• From the command line, enter:
get btgetenv$ ("AGILENT3070_ROOT") &
"
<path to the file>"
For more information about this command, see Use
of the Root Directory Environment Variable in a
BT-BASIC Window on page 2-4.
Edit in BT-BASIC
• Press F1 on the keyboard, if necessary, to toggle to
the workspace.
To move the cursor, use the keyboard arrow keys,
and the Insert Char, and Delete Char keys.
Save in BT_BASIC
1 Press F1 on the keyboard, if necessary, to toggle to
the command line.
2 Enter:
re-save
Exit BT-BASIC
1 Press F1 on the keyboard, if necessary, to toggle to
the command line.
2 Enter:
exit
How to Edit the System Config File to Match the
Testhead Configuration
If the testhead configuration has changed, the system
config file MUST be updated to reflect the change.
Table 2-5 on page 2-9 describes the process.
Table 2-5 Edit the system config file to match the testhead configuration
Task Step
1 Open the system config file
in a BT-BASIC window.
a Open a BT-BASIC window by double-clicking the desktop icon.
b From the BT-BASIC command line, enter:
get btgetenv$ ("AGILENT3070_ROOT") & "/diagnostics/th1/config"
2 Arrange or modify
statements to reflect the
actual testhead
configuration.
Do this as required.
See Table 2-8 on page 2-16 for commonly used BT-BASIC commands.
To Next Page
Loading...
Need help?
General
