© Agilent Technologies 2001–2003 Agilent 3070 System Installation Manual (MS Windows Version) 2-38
Chapter 2: MS Windows System Installation Reference: The hosts File
The hosts File The path to the hosts file is:
■ $SystemRoot/system32/drivers/etc/hosts
NOTE
$SystemRoot is an environment variable that is
usually set to: c:/winnt
The hosts file must include these IP addresses:
10.3.112.2 testhead1 (System Card)
10.3.112.7 module3
10.3.112.6 module2
10.3.112.5 module1
10.3.112.4 module0
Example 2-1 on page 2-39 shows a sample hosts file.
Test Device Communication
To verify connection to each of the devices listed in the
hosts file:
1 Boot the testhead.
2 From a DOS window prompt, enter:
ping <system name>OR
ping <IP address>
To Next Page
Loading...
