2-4 Service Guide E8361-90001
General Product Information PNA Series Microwave Network Analyzers
Analyzer Options, Upgrades, and Accessories E8361A
Option 022, Extended Memory
This upgrade provides additional RAM for a total of 512 MB.
This option is also available as an upgrade kit, model number: E8361AU-022.
Option 080, Frequency Offset Mode
This upgrade provides the additional hardware and software necessary to make frequency
offset measurements.
This option is also available as an upgrade kit, model number: E836xBU-080.
Option 083, Frequency Converter Measurement Application
1
This option adds an intuitive and easy-to-use user interface, advanced calibration choices
that provide exceptional amplitude and phase accuracy, and control of external signal
sources for use as local oscillators (both fixed and swept-LO measurements are supported).
A graphical set-up dialog box lets you quickly set up the instrument for single or dual
conversion devices. This set-up screen also helps you calculate and choose where mixing
and image products will fall.
This option is also available as an upgrade kit, model number: E8361AU-083.
Option 099, Firmware Upgrade
This upgrade provides the latest revision of firmware for the PNA series network
analyzers on CD-ROM. This firmware is user installable. The installation requires a USB
CD-ROM drive (see “CD-RW Drive”) or an external computer connected to a Local Area
Network (LAN).
This firmware is also available on the Internet at the Agilent website:
http://www.agilent.com/find/pna. (Select your analyzer’s model number in this website to
view available upgrades.)
This option is only available as an upgrade kit, model number: E8361AU-099.
CD-RW Drive
This accessory is an external read/write CD drive with a USB cable.
This accessory can be ordered as model number N4688A.
USB Hub
This accessory is a 4-port USB hub for connecting additional USB peripheral devices.
This accessory can be ordered as model number N4689A.
1. This option only functions when option 080 is enabled.