Service Guide E8361-90001 2-5
PNA Series Microwave Network Analyzers General Product Information
E8361A Analyzer Options, Upgrades, and Accessories
Option 0BW, Printed Service Guide
This option adds a printed copy of the assembly-level service guide (this manual).
This option is not available as an upgrade. It can be ordered as part number E8361-90001.
Option 1CP, Rack Mount Flange Kit for Instruments with Handles
Option 1CP provides a rack mount kit that contains a pair of flanges (cut to adapt to
handles), rack mount rails, and the necessary hardware to mount the analyzer in an
equipment rack with 482.6 mm (19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to “Rack Mount Kits and Handle Kits”
on page 6-40 for the part numbers.
Option 1CM, Rack Mount Flange Kit for Instruments without Handles
Option 1CM provides a rack mount kit that contains a pair of flanges, rack mount rails,
and the necessary hardware to mount the analyzer in an equipment rack with 482.6 mm
(19 inches) horizontal spacing.
Additional kits may be ordered from Agilent. Refer to “Rack Mount Kits and Handle Kits”
on page 6-40 for the part numbers.
To Next Page
Loading...
