4 Using the Digital Multimeter Functions
114 Agilent U1602B/U1604B User’s and Service Guide
Automatic Measurement in Multimeter Mode
The automatic measurement minimum, maximum and average are also
available for all multimeter measurements except diode test and
capacitance measurement.
The real- time minimum and maximum measurement are displayed along
with the recorded time. The average value is the arithmetic average value
of the last 8 readings.
To enable the function, press F3 in each respective multimeter function
submenu. Refer to Figure 4- 15.
Figure 4-15 Automatic measurement in resistance measurement mode
To Next Page
Loading...
