Using the Scope Functions 3
Agilent U1602B/U1604B User’s and Service Guide 55
Display Controls
Display Types
This instrument provides alternative selections display types vectors and
dots. The vectors display type is a connection of dots and gives more
realistic waveforms compared to the dots display type. It allows the view
of steep edges on a waveform, especially square waves. The vector display
type is set as the default display type and subtle detail of complex
waveforms.
To select display types, follow the instruction below:
1 Press button at the front panel to access the User menu.
2 Press F1 to access the Display submenu.
3 Press F1 on page 1/2 of the Display submenu to select the display type
from a pull- up menu.
Figure 3-22 Dots display type
To Next Page
Loading...
