General Disassemble 8
160 Agilent U1602B/U1604B User’s and Service Guide
To remove battery pack
There are two alternative ways to remove battery pack from the
instrument:
• without stand installed
• with stand installed (for battery replacement purpose)
To remove battery pack without stand installed, perform the instructions
below and followed by the battery removing procedures:
• To remove stand
1 Remove two screw as pointed in Figure 8- 3.
Figure 8-3 Remove battery cover screw
To avoid electric shock, ensure you disconnect all input and power cord to the
instrument. Do not operate the instrument until the battery covers are covered
securely.
To Next Page
Loading...
