Agilent U1602B/U1604B User’s and Service Guide xxv
Figures
Figure 1-1. Standard shipped components 3
Figure 1-2. Optional accessories 4
Figure 1-3. Battery charging 5
Figure 1-4. Factory setup 7
Figure 1-5. Self-calibration dialog box 9
Figure 1-6. Select the date format 10
Figure 1-7. Date and time setting 10
Figure 1-8. Auto-power off function 11
Figure 1-9. Adjust display contrast 13
Figure 1-10. Connection for scope probe compensation 14
Figure 1-11. A 10X scope probe with over compensation, adjust the
trimmer capacitor to obtain the flattest pulse possible as
shown in Figure 1-13. 15
Figure 1-12. Trimmer capacitor for probe compensation 15
Figure 1-13. Pulse shape reference for scope probe
compensation 16
Figure 2-1. U1600B series handheld digital oscilloscope front and
side view 18
Figure 2-2. Interpreting Scope Display 22
Figure 2-3. Interpreting meter display 24
Figure 3-1. Scope menu display with displayed of both channels
display. 26
Figure 3-2. Select On or Off to enable or disable the waveform
display 27
Figure 3-3. Adjust vertical position for the waveform
displayed. 28
Figure 3-4. Reset vertical ground reference symbol to zero
volt. 29
Figure 3-5. Vertical sensitivity display 30
Figure 3-6. AC channel coupling 31
Figure 3-7. DC channel coupling 32
Figure 3-8. Gnd channel coupling 32
Figure 3-9. Probe attenuation scale setting 33
To Next Page
Loading...
Need help?
General
