Agilent U1602B/U1604B User’s and Service Guide xvii
Contents
1 Getting Started 1
To Inspect Package Contents 2
To Charge a Battery 5
To Power On Instrument 6
To Reset to Default Factory Settings 6
To Perform Self-Calibration 8
To Set Date and Time 9
To Set Auto-Power Off 11
To Select Quick Help Language 12
To Adjust Contrast of Display 13
To Compensate Scope Probe 14
2 Front Panel and Displays Overview 17
Front Panel Overview 17
Oscilloscope Display Overview 22
Multimeter Display Overview 24
3 Using the Scope Functions 25
Vertical Controls 26
Channel Selection for Waveform Display 26
Vertical System Setup 28
To Change Vertical Reference Ground Position 28
To Center the Waveform on the Display 29
To Change Vertical Sensitivity 30
Channel Coupling Control 31
AC Channel Coupling 31
DC Channel Coupling 32
Ground channel coupling 32
To Next Page
Loading...
