Akuvox E16C - Integration with Third Party Device; Integration via Wiegand

www.akuvox.com
E16 Door Phone Administrator Guide
97
19 Integration with Third Party Device
19.1 Integration via Wiegand
If you want to integrate the E16 series door phone with the third-party devices via
Wiegand. To configure it, you can go to the web Device > Wiegand interface.
Parameter Set-up:
• Wiegand Display Mode: select Wigand Card code format among 8H10D; 6H3D5D;
6H8D; 8HN; 8HR.
• Wiegand Card Reader Mode: set the Wiegand data transmission format among three
options: Wiegand 26, Wiegand 34, Wiegand 58. The transmission format should be
identical between the door phone and the device to beintegrated.
• Wiegand Transfer Mode: set the Transfer mode between Input or Output if the door
phone is used as a receiver, then set it as Input for the door phone and vice versa.