Akuvox E16C User Manual

www.akuvox.com
E16 Door Phone Administrator Guide
60
Note
• The function should work with Akuvox SmartPlus. For more information,
please contact Akuvox technical support.
11.6 Unlock by QR Code
QR code is another option for door unlock. You need to enable the QR code function before
you can gain door unlock via QR code. You can go to Access Control > Relay > Open Relay
via QR Code.
Unlock by Bluetooth
You can also gain the door access by mobile phone with Bluetooth which is used together
with Akuvox SmartPlus. You can shake the mobile phone closer to the access control
terminal for the door access. To configure the configuration on web Access Control > BLE
> BLE interface.
Parameter Set-up:

Akuvox E16C Specifications

General

Color	Yes
Speakerphone	No
Connectivity technology	Wired
Number of displays supported	-
Display diagonal	5 \
Display resolution	1280 x 720 pixels
Display technology	IPS
Proper use	Indoor
Product color	Black
Housing material	Plastic
International Protection (IP) code	IP65
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	1
Megapixel	2 MP
Indoor unit power type	DC
Operating temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Quantity per pack	1 pc(s)
Operating system installed	Linux

Weight and Dimensions

Depth	27.5 mm
Width	88 mm
Height	192 mm