E16 Door Phone Administrator Guide
•
Repeatedly: select Repeatedly, if you want the device to perform Autop according to
the schedule you set up.
•
Power On + Repeatedly: select Power On + Repeatedly if you want to combine
Power On mode and Repeatedly mode that will enable the device to perform Autop
every time it boots up or according to the schedule you setup.
•
Hourly Repeat: select Hourly Repeat if you want the device to perform Autop every
hour.
18.4
PNP Configuration
Plug and Play (PNP) is a combination of hardware and software
support that enables a computer system to recognize and adapt to hardware configuration
changes with little or no intervention by a user. To configure the configuration on the web
System > Auto Provisioning > PNP Option interface.
18.5
DHCP Provisioning Configuration
Auto-provisioning URL can also be obtained using the DHCP option which allows the
device to send a request to a DHCP server for a specific DHCP option code. If you want to
use Custom Option as defined by users with option code ranging from 128-255), you are
required to configure DHCP Custom Option on the web interface. To set up DHCP
AutoP with “Custom Option” and “Power on” mode, on web System > Auto Provisioning >
Automatic Autop interface. Click Export tab in Export Autop Template to export Autop
template. Then set up DHCP Option on DHCP server.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
