Akuvox E16C - Camera Mode

www.akuvox.com
E16 Door Phone Administrator Guide
80
Note
• Fill in the specific IP address of the door phone in the URL.
that other devices will be able to see the video from the access control terminal. To
configure the configuration on web Surveillance > ONVIF interface.
Parameter Set-up:
• Discoverable: tick the check box to turn on the ONVIF mode. If you select a video
from the door phone camera can be searched by other devices. ONVIF mode is
Discoverable by default.
• UserName: enter the user name. The user name is admin bydefault.
• Password: enter the password. The password is admin bydefault.
After the setting is complete, you can enter the ONVIF URL on the third-party device to view
the video stream.
For example: http://IP address:80/onvif/device_service
13.5 Camera Mode
You can select the camera mode for better video quality depending on where the door
phone is located. You can select Indoor mode for better video image(RTSP, ONVIF, and
Mjpeg) if the door phone is placed indoors. On the contrary, you can select Outdoor mode
if the door phone is placed outdoors.