Akuvox E16C User Manual

www.akuvox.com
E16 Door Phone Administrator Guide
26
Parameter Set-up:
• Status: check to see if the SIP account is registered or not.
• Account Active: go to Enable or Disable to activate or deactivate the registered SIP
account.
• Display Name: configure the name, for example, the device’s name to be shown on
the device being called to.
• Display Label: configure the device label to be shown on the device screen.
• Register Name: enter the SIP account register Name obtained from the SIP account
administrator.
• Username: enter the user name obtained from the SIP account administrator.
• Password: enter the password obtained from the SIP account administrator.
7.2.2 SIP Server Configuration
SIP servers can be set up for devices in order to achieve call sessions through SIP servers
between intercom devices. To set up a SIP server, you can go to Account > Basic
> Preferred SIP Server.

Akuvox E16C Specifications

General

Color	Yes
Speakerphone	No
Connectivity technology	Wired
Number of displays supported	-
Display diagonal	5 \
Display resolution	1280 x 720 pixels
Display technology	IPS
Proper use	Indoor
Product color	Black
Housing material	Plastic
International Protection (IP) code	IP65
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	1
Megapixel	2 MP
Indoor unit power type	DC
Operating temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Quantity per pack	1 pc(s)
Operating system installed	Linux

Weight and Dimensions

Depth	27.5 mm
Width	88 mm
Height	192 mm