Akuvox E16C - Lift Control

www.akuvox.com
E16 Door Phone Administrator Guide
99
• HTTP API Enable: HTTP API Enables or disables the HTTP API function for
third-party integration. For example, if the function is disabled, any request
to initiate the integration will be denied and HTTP 403 forbidden status will
be returned.
• Authorization Mode: select among four options: None, WhiteList, Basic, and Digest
for authorization type, which will be explained in detail in the following chart.
• Username: enter the user name when Basic and Digest authorization mode is
selected. The default user name is Admin.
• Password: enter the password when Basic and Digest authorization mode is
selected. The default user name is Admin.
• 1
st
IP- 5
th
IP: enter the IP address of the third-party devices when the WhiteList
authorization is selected for the integration.
19.3 Lift Control
You can connect the E16 door phone with AKuvox EC32 lift controller and third-party lift
controllers for the lift control. You can summon the lift to go down to the ground floor
when you are granted through various types of access methods on the door phone. To set
up the lift control, go to Device > Lift Control.
Parameter Set-up:
• Lift Control List: select integration mode among seven Options: None, OSDP, Akuvox
EC32, KEYKING. The detail for the options will be provided in the following chart.
NO.
Integration Mode
Description
1
None
If you select None then the RS485 integration will
be disabled.