E16 Door Phone Administrator Guide
Account 1 and Account 2, then the number will be called out from Account 1 by
default.
•
Prefix: enter the short number to replace the dialed number you wish to replace.
•
Replace 1/2/3/4/5:enter the dialed number(s) you wish to replace. It supports up to 5
numbers maximum for the replacement of the device configuration. For example, if
you replace five original dial numbers with a common short number such as 101
then the five intercom devices with the dialed number will be called at the same time
when you dial 101.
7.3.2
Quick Dial by Number Replacement on the WebInterface
You can replace the long SIP/IP number with the short number on the web interface. To
configure it, you can go to Intercom > Dial Plan.
7.4
Auto-answer Configuration
You set up the auto answer feature so that the door phone can automatically answer the
incoming calls, such as, from the resident’s indoor monitor, Smarplus App, and the guard
phone. Also, you can select audio or video auto-answer mode based on your need.
To configure Auto-answer function:
Go to Intercom > Call Feature > Auto Answer.
To Next Page
Loading...
