E16 Door Phone Administrator Guide
11.11.1 Configure DTMF White List
In order to secure the door access via DTMF codes, you can set up the DTMF whitelist on
the device web Access Control > Relay > Open Relay Via DTMF interface so that only the
caller numbers you designated in the door phone can use the DTMF code to gain door
access.
11.12
Body Temperature Measurement for Door Access
（Optional）
E16 series provides you with an optional body temperature measurement function
designed to be applied in the situation where the measurement becomes necessary for the
safety of the residents and visitors etc. Residents and visitors are required to go through
temperature measurements along with an optional mask detection check before they are
allowed for door access.
11.12.1
Body Temperature Measurement Configuration
You can configure the body temperature measurement function in terms of defining the
normal temperature as well as making the schedule for the validity of the function etc. To
configure the configuration on web Access Control > Body Temperature > Measuring
Body Temperature interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
