E16 Door Phone Administrator Guide
•
TCP: select TCP for a reliable but less-efficient transport layerprotocol.
•
TLS: select TLS for Secured and Reliable transport layer protocol.
•
DNS-SRV: select DNS-SRV to obtain a DNS record for specifying the location of
servers. And SRV not only records the server address but also the server port.
Moreover, SRV can also be used to configure the priority and the weight of the server
address.
7.3
Dial Options Configuration
E16 offers a variety of Dial options that allows you to have a fast dial experience while
relieving you of memory burden due to long and complex dial numbers.
7.3.1
Quick Dial By Number Replacement on the Device
You can replace multiple device dial numbers such as IP addresses or SIP numbers with
only one short number. On the device Setting screen, select Replace Rule, then select Add.
Parameter Set-up:
•
Account: select the account to which you want to apply dial number replacement.
The account is Auto by default ( to dial out from the account in which the dialed
number has been registered). You can select either account 1 or account 2 from
which the number can be dialed out. If you have registered the dialed number in both
To Next Page
Loading...
