E16 Door Phone Administrator Guide
•
Wiegand Input Data Order: set the Wiegand input data sequence between Normal
and Reversed if you select Reversed then the input card number will be reversed
and vice versa.
•
Wiegand Output Basic Data Order: select Normal if you want Wiegand output data to
be displayed in a normal state. Select Reversed if you want to reverse the output
data, for example from “0x110x220x330x44” to “0x440x330x220x11”.
•
Wiegand Output Data Order: set the Wiegand output data sequence between Normal
and Reversed if you select Reversed then the input card number will be reversed
and vice versa.
•
Wiegand Output CRC: this function is used for Wiegand data inspection. It is turned
on by default. If it is not turned on, you might not be able to integrate the device with
third-party devices.
19.2
Integration via HTTP API
HTTP API is designed to achieve a network-based integration between the third-party
device with the Akuvox intercom device. You can configure the HTTP API function on the
web Setting > HTTP API interface for the integration.
Parameter Set-up:
To Next Page
Loading...
