Akuvox E16C - Home Screen Configuration; Volume & Tone Configuration

www.akuvox.com
E16 Door Phone Administrator Guide
16
5.4.3 Home Screen Configuration
You can change the home screen display through the configuration of tab name and tab
arrangement on the device web interface if needed. Path: Device > LCD > Key In
Homepage Of The Building Theme.
Parameter Set-up:
• Name: enter a new name to replace the original type of name, but it does not change
the attribute of the type.
• Type: select the tab type corresponding to the index number which indicates the tab
position. For example, if you want to make the Speed Dial tab be displayed in
position one, you can change the type in index number 1 to Speed Dial. And you can
change another tab position accordingly.
• Value: enter the IP or SIP number to be attached to the reception icon for the speed
dial. The number entered will be dialed out as you press the reception icon on the
home screen. This field is only valid for speed dial. You can type in five-speed dial
numbers maximum and every two of the number must be separated by “;”.
5.5 Volume & Tone Configuration
Volume and tone configuration in E16 door phone refers to the call volume (speaker), Mic
volume, and prompt volume (eg. open door tone). Moreover, you can upload the tone you
like to enrich your personalized user experience.