E16 Door Phone Administrator Guide
11 Door Unlock Configuration
E16 series door phones offer you three types of door access via PIN code, RF card, and
Facial recognition. You can configure them on the device and web interface. Moreover, you
can import or export the configured files to maximize your RF card configuration
efficiency.
11.1
Access Authentication
You can set up several access authentication modes, and set up authentication security as
needed. On the web, navigate to Access Control > Relay > Access Authentication Mode.
Parameter Set-up:
•
Authentication Mode: select Any method if you allow all the access methods to
unlock the door. Select Face + PIN if you want to apply dual access methods (Face +
PIN) for the door unlock. Select Face + RF Card if you want to apply dual access
methods (Face+ RF Card) for the door unlock.
11.2
Configure PIN Code for Door Unlock
You can create and modify both public PIN codes and private PIN codes for door access
on E16 series door phones.
11.2.1
Configure Public PIN code
You can configure and change public PIN codes.
On the web interface, go to Access Control > PIN Setting > Public PIN.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
