E16 Door Phone Administrator Guide
Note
•
When the check box is not ticked, parameters related to the NTP server
cannot be edited.
Parameter Set-up:
•
Automatic Date&TimeEnabled: enable it if you want the device’s date and time to be
automatically set up and synchronized with the default time zone and the NTP server
(Network Time Protocol).
•
Time Zone: select the specific time zone depending on where the device is used and
then press Confirm tab for the confirmation. The default time zone is GMT+0.00.
•
Primary Server: enter the primary NTP server you obtained in the NTPServer.
•
Date/Time: set the date and time for the device manually when you disable the
automatic date and time service.
To Next Page
Loading...
