E16 Door Phone Administrator Guide
Parameter Set-up:
•
Type: among three options Disabled, WebRelay and Both. Select WebRelay to enable
the web relay. Select Disable to disable the web relay. Select Both to enable both
local relay and web relay. If you select Web relay, then the local relay will not be valid.
•
IP Address: enter the web relay IP address provided by the web relay manufacturer.
•
User Name: enter the User name provided by the web relay manufacturer.
•
Password: enter the password provided by the web relay manufacturer. The
passwords are authenticated via HTTP and you can define the passwords using http
get Action.
•
Web Relay Action: enter the specific web relay action command provided by the web
manufacturer for different actions by the web relay.
•
Web Relay Key: enter the configured DTMF code, when the door is unlocked via the
DTMF code, the action command will be sent to the web relay automatically.
After the web relay is set up, you can select the specific web relay action to be carried out.
You can go to Directory > User, then click , then scroll down to AccessSetting.
To Next Page
Loading...
