E16 Door Phone Administrator Guide
Note
•
This step is applicable to door access by RF card and facial recognition as
they are identical in configuration.
Parameter Set-up:
•
User ID: enter the user’s ID.
•
Name: enter the user name ( resident’s name).
•
Code: enter the user’s private PIN.
After user information and PIN code are entered, you can scroll down to Access Setting on
the same page to set door access Schedule for Private PIN Code door access:
Parameter Set-up:
•
Relay: select the relay for the door unlock for the user.
•
Floor NO: enter the resident’s floor number.
•
Web relay: select the specific number of web relay action commands you have set
up on the web interface.
•
Schedule: select from the created door access schedule on the right box and move
the one to be applied to the user(s)-specific PIN code door access to the box on the
right side.
To Next Page
Loading...
