E16 Door Phone Administrator Guide
•
Sender's Email Address: enter the sender’s email address from which the email
notification will be sent out.
•
Receiver's Email Address: enter the receiver’s email address.
•
Receiver’s Email Name: enter the name of the email receiver.
•
SMTP Server Address: enter the SMTP server address of the sender.
•
Port: enter the port number from which the email is sent out.
•
SMTP User Name: enter the SMTP user name, which is usually the same as the
sender’s email address.
•
SMTP Password: configure the password of the SMTP service, which is the same as
the sender’s email address.
•
Email Subject: enter the subject of the email.
•
Email Content: compile the email contents according to your need.
FTP Notification setting
If you want to receive the security notification via FTP, you can configure the FTP
notification on the web interface properly. To configure the configuration on web Setting >
Action > FTP Notification interface.
Parameter Set-up:
•
FTP server: enter the address (URL) of the FTP server for the FTP notification.
•
FTP User Name: enter the FTP server user name.
•
FTP Password: enter the FTP server password.
•
FTP Path: enter the folder name you created in the FTP server.
To Next Page
Loading...
