Akuvox R20A Series User Manual

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
10
Parameter Set-up:
 Time Zone: select the specific time zone depending on where the device
is used and then press Confirm tab for the confirmation. The default time
zone is GMT GMT+0.00.
 Primary/Secondary Server: the time zone server,normally it will
automatically obtain the time when connecting to the network. The
secondary server will take effect when the primary server is invalid.
 Update Interval: to configure interval between two consecutive NTP
requests.
You can also set up time manually, select the Manual checkbox, and input
time data.

Akuvox R20A Series Specifications

General

Installation	Wall-mounted
Protection level	IP65
RS485	Yes
Camera	2MP
Audio	Built-in microphone and speaker
Network	10/100Mbps Ethernet
Protocols	SIP, RTSP
Power	PoE or 12V DC