Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
DHCP: select the DHCP mode by moving the toggle switch to the right.
DHCP mode is the default network connection. If the DHCP mode is
turned on, then the door phone will be assigned by the DHCP server with
IP address, subnet mask, default gateway and DNS server address
automatically.
Static IP: select the static IP mode by checking off the DHCP check box.
When static IP mode is selected, then the IP address, subnet mask,
default gateway, and DNS servers address have to be manually
configured according to your actual network environment.
IP Address: set up the IP Address if the static IP mode is selected.
Subnet Mask: set up the subnet Mask according to your actual network
environment.
Default Gateway: set up the correct gateway default gateway according
to the IP address of the default gateway.
LAN DNS1/2: set up preferred or alternate DNS Server (Domain Name
Server)according to your actual network environment. Preferred DNS
server is the primary DNS server address while the alternate DNS server
is the secondary server address and the door phone will connects to the
alternate server when the primary DNS server is unavailable .
9.3. Device Deployment in Network
Door phones should be deployed before they can be properly configured in
the network environment in terms of their location, operation mode, address
To Next Page
Loading...
Need help?
General
