EasyManua.ls Logo

Akuvox R20A Series - Multicast

Akuvox R20A Series
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
33
10.7.6. Multicast
Multicast uses one-to-many mode to communicate in a range. Door phone can
be a listener and receive the audio from the listened part.
Parameters Set-up:
Paging Barge: multicast or how many multicast calls are higher priority
than SIP call, if you disable Paging Priority Activve, SIP call will have high
priority.
Paging Priority Active: multicast calls are called in order of priority or not.
Listening Address: Enter the multicast IP address you want to listen. The
multicast IP address need to be same as the listened part and the
multicast port can not be same for each IP address. Multicast IP address is
from 224.0.0.0 to 239.255.255.255.

Table of Contents

Related product manuals