Akuvox R20A Series User Manual

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
84
23. Integration with Third Party Device
23.1.Integration via Wiegand
If you want to integrate Akuvox door phone with the third party devices via
Wiegand, you can configure the Wiegand on the web interface.
Parameter set-up:
 Wiegand Type: set the wiegand data transmission format among three
options: Wiegand 26, Wiegand 34, Wiegand 58. The transmission format
should be identical between the door phone and the device to be
integrated.
 Wiegand Mode:: set the Transfer mode between Input or Output if the
door phone is used as a receiver then set it as “ Input” for the door phone
and vice versa.

Akuvox R20A Series Specifications

General

Installation	Wall-mounted
Protection level	IP65
RS485	Yes
Camera	2MP
Audio	Built-in microphone and speaker
Network	10/100Mbps Ethernet
Protocols	SIP, RTSP
Power	PoE or 12V DC