Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
Color Off: the default status is OFF.
Color On: it can support three colors: Red, Green, Blue.
Blink Mode: to setup the different blink frequency.
Note:
The Status and Color off item can not be changed.
The LED of upgrading mode can not be adjusted.
E12W support three colors: Red, Blue and Purple.
7.3. Set up LED Display from HTTP URL
Akuvox door phones support to use HTTP URL to remote control the LED
display status. You can enter the HTTP URL in the browser to manage the
LED color and frequency.
Parameters Set-up:
HTTP URL format:
http://PhoneIP/fcgi/do?action=LedAction&State=1&Color=1&Mode=2500
Status: 1=Idle; 2=OffLine; 3=Calling; 4=Talking; 5=Receiving; Color:
1=Green; 2=Blue; 3=Red; Mode: 0=Always On; 1=Always Off;
500/1000/1500/2000/25000/3000
7.4. LED Setting on Card Reader Area
You can enable or disable the LED lighting on the card reader area as needed
on the web interface. Meanwhile, If you do not want to have the LED light on
the card reader area to stay on, you can also set the timing for the exact time
To Next Page
Loading...
Need help?
General
