Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
administrator.
10.4.SIP Server Configuration
SIP servers can be set up for device in order to achieve call session through
SIP server between intercom devices. To do this configuration also on web
Account > Basic > SIP Server interface.
Parameter Set-up:
Preferred SIP Server: enter the primary server IP address number or its
URL.
Alternate SIP Server: enter the backup SIP server IP address or its URL.
Port: set up SIP server port for data transmission.
Registration Period: set up SIP account registration time pan. SIP
re-registration will start automatically if the account registration fails
during the registration time span. The default registration period is
“1800”, ranging from 30-65535s.
10.5.Configure Outbound Proxy Server
An outbound proxy server is used to receive all initiating request messages
and route them to the designated SIP server in order to establish call session
via port-based data transmission. To set it up on the device web Account >
To Next Page
Loading...
Need help?
General
