Akuvox R20A Series User Manual

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
60
interface.
Parameter Set-up:
 Action to execute: To choose which action to be executed after triggering.
16.4.2. Configure Motion Action
When the Motion Detection feature is working , you can make it trigger an
action. To do this configuration on web Intercom > Motion interface.
Parameter Set-up:
 Action to execute: To choose which action to be executed after triggering.
15.4.3. Configure Input Action
When Input interface is working , it can also trigger an action. You can do this
configuration on web Intercom > Input interface.
Note:
 For E12W, the operation path is Surveillance > Motion

Akuvox R20A Series Specifications

General

Installation	Wall-mounted
Protection level	IP65
RS485	Yes
Camera	2MP
Audio	Built-in microphone and speaker
Network	10/100Mbps Ethernet
Protocols	SIP, RTSP
Power	PoE or 12V DC