EasyManuals Logo

Akuvox R20A Series User Manual

Akuvox R20A Series
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
34
Label: Enter the label for each listening address.
10.7.7. Configure Maximum Call Duration
Door phone allows you to set up the call time duration in receiving the call from
the calling device as the caller side might forget to hang up the intercom device.
When the call time duration is reached, the door phone will terminate the
calling automatically.
Parameters Set-up:
Max Call Time: Enter the call time duration according to your need
(Ranging from 0-120 min.). The default call time duration is 5 min.
Note:
Max call time of device is also related with max call time of SIP server.
If using SIP account to make a call, please pay attention to the max
call time of SIP server. If the max call time of SIP server is shorter
than the max call time of device , the shorter one is available.
10.7.8. Maximum Dial Duration
Maximum Dial duration is consisted of Maximum dial in time duration and the
maximum dial out time. Maximum dial in time refers to the maximum time
duration before the door phone hang up the call if the call is not answered by
the door phone. In contrary, Maximum dial out time refers to the maximum time

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox R20A Series and is the answer not in the manual?

Akuvox R20A Series Specifications

General IconGeneral
InstallationWall-mounted
Protection levelIP65
RS485Yes
Camera2MP
AudioBuilt-in microphone and speaker
Network10/100Mbps Ethernet
ProtocolsSIP, RTSP
PowerPoE or 12V DC

Related product manuals