Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
RTSP User Name: enter the name used for RTSP authorization.
RTSP User Password: enter the password for RTSP authorization.
RTSP Authentication Type: select RTSP authentication type between
“ Basic” and “ Digest”. “Basic “ is the default authentication type.
17.1.2. RTSP Stream Setting
You can select the video codec format for the RTSP stream for the
monitoring and configure video resolution and bit-rate etc based on your
actual network environment on the web Intercom > RTSP > RTSP stream
interface.
Parameter Set-up
：
RTSP Audio Enabled
：
tick to enable RTSP audio which means , the door
phone can also send audio information to the monitor by RTSP.
RTSP Video Enabled
：
the door phone can send the video information to
the monitor. After enabling RTSP feature, the video RTSP is enabled by
default and can not be modified.
Note:
For E12W, the operation path is Surveillance > RTSP.
To Next Page
Loading...
Need help?
General
