Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
Ringback volume: Adjust the volume for the ringback tone.
Voice Prompt Volume: Adjust the volume for voice prompt.
Note:
For E12W, the operation path is Device > Voice > Volume control.
Voice Prompt Volume can only be configured on E12W.
8.2. Open Door Tone Configuration
You can not only enable or disable the Open Door Tone but also controls the
prompt words that accompanies the tone on web Intercom > Voice interface.
Parameters Set-up:
Open Door Success Warning: click the field Enabled or Disabled
depending on if you want to hear the prompt words that accompanies that
Open Door Success tone.
Open Door Failed Warning: click the field Enabled or Disabled
depending on if you want to hear the prompt words that accompanies that
Open Door Failed tone.
Open Door Inside Tone Enabled: select the checkbox to enable the open
door inside tone.