Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
10. Intercom Call Configuration
Intercom call in the device can be configured to allow you to perform a
variety of customized intercom calls such as IP call and SIP call for different
application scenarios.
10.1.IP call & IP Call Configuration
IP call can be made directly on the intercom device by entering the IP number
on the device. And you can also disable the direct IP call if you do not allow
IP call to be made on the device.
Parameters Set-up:
Direct IP Call: click “Enable” or “Disable” to turn the direct IP call on or off.
For example if you do not allow direct IP call to be made on the device, you
can click” Disable” to terminate the function.
Direct IP AutoAnswer: click “Enable” or “Disable” to turn the direct IP call
on or off when the phone automatically answer the incoming call.
Direct IP port : set up the IP direct call port, 5060 is the default port.
10.2.SIP Call &SIP Call Configuration
You can make SIP call ( Session Initiation Protocol ) in the same way as you
do for making the IP calls on the device. However, SIP call parameters related
to its account, server, and transport type need to be configured first before
you can make calls on the device.
To Next Page
Loading...
Need help?
General
