EasyManua.ls Logo

Akuvox R20A Series - Video Codec Configuration

Akuvox R20A Series
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
37
11.2.Video Codec Configuration
Akuvox door phone support H264 codec that provides a better video quality
at much lower bit rate with different video quality and payload. To set up
video codec on web Account > Advanced interface.
Parameter Set-up:
Codec Name: Check to select the H264 video codec format for the door
phone video stream. H264 is the video codec by default.
Codec Resolution: select the code resolution for the video quality among
four options:”QCIF”, “CIF”, “VGA”, “4CIF” and “720P” according to your
actual network environment. The default code resolution is 4CIF.
Codec Bitrate: select the video stream bit rate (Ranging from 320-2048).
The greater the bitrate, the data transmitted in every second is greater in
amount therefore the video will be clearer.. While the default code bitrate
is 2048.
Codec Payload: select the payload type (ranging from 90-118) to
Codec Type
Bandwidth
Consumption
Sample Rate
PCMA
64 kbit/s
8kHZ
PCMU
64 kbit/s
8kHZ
G729
8 kbit/s
8kHZ
G722
64 kbit/s
16kHZ

Table of Contents

Related product manuals