Akuvox R20A Series - Robin Call; Web Call

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
31
Note:
 R20B has 2/3/4/5 push buttons,
R20A/R26C/R26P/E11R/E21A/E21V/E12W has only one push
button.
 E12W supports 8 lines, which means users can connect to 8
contacts simultaneously by pressing push button.
10.7.3. Robin Call
Robin call is used to initiate multiple numbers which set up in Push Button one
by one. If the previous callee do not answer within the robin call timeout, the
call will be transferred to next one. If the call is answered by one of the callee,
the call will not be transferred any more.
Parameters Set-up:
 Robin Call Enable: Enable or disable the robin call function. It is disabled
by default.
 Robin Call Timeout: Call out time value for each number, range from 5 -
60s.
10.7.4. Web Call
In addition to making IP/SIP call directly on the device, you can also make the
call on the device web interface without approaching to device physically for
testing purpose etc.